I just bought the Volar Max and it is the only tuner for my laptop (Dell  XPS) with Vista  MCE tv Pack.

It finds the digital tuner, but will not find any qam channels.

If I use the AVER  media app it finds the qam channels fine.

Do I need to have a second tuner installed for this to work?

Thanks

Dear www.TheGreenButton.com community,

This is Felix from AVerMedia Technologies, Inc. again

AVerMedia Technlogies, Inc. released another version of QAM tools version V.1.0.0.12

V1.0.0.12  Nov,26 2008

--------------------

Fix     - Show "Save as" for Save button

Fix     - HRC scan with new GraphAPI

Update      - Add functionality to scan both STD and HRC frequencies

Update      - To select programs depending on the selection: Select All, Select None, Unencrypted Only

 

Please download new build from the following ftp :  

ftp.aver.com/Max

user name: beta

password: betatest

Good luck, and we, AVerMedia is looking forward to hearing your VALUABLE FEEDBACK

---

Felix Kolotinsky
Product Manager
AVerMedia Technologies, Inc.

I must be doing something wrong -

The Aver MediaCenter works fine.  I get all the channels fine. 

In VMC it tells me "Tuner Not Found".  I've updated drivers to no avail.  Although the Volar seems cool I think I will return it if I can't get VMC working.

 

Any thoughts?

 

Thanks

This is well know issue with VMC, however there is a trick to fix it.

Try this one first

Open Device Manager and make sure the tuner device is working properly (without yellow bang, etc.)

* Make sure there is no other application hogging the tuner device, e.g. MCS or other TV applications.

* Make sure eHome Receiver (ehrecvr) service is running properly.

* Try:

- Close Media Center. Stop and restart ehrecvr service (“net stop ehrecvr” and “net start ehrecvr” from cmd). Restart Media Center.

- Delete MCE TV tuner settings in the registry: HKLM\SPFTWARE\Microsoft\Windows\CurrentVersion\Media Center\Service\Video\Tuner. Keep the DVR entry and delete all others, as shown below. Reboot the PC. And go through Set Up TV Signal under Media Center again.

 

 

 

---

Felix Kolotinsky
Product Manager
AVerMedia Technologies, Inc.

Felix,

Thanks for the reply.  This led me to my problem - my Receiver service is not working properly.  It stops with a "1067 - process terminated unexpectedly". 

From what I've read there are many programs that can interfere with this service.  I need to chase this down now.

Thanks again.

 

 

I'm using Vista SP1 on dell xps m1330.
 
I received my Volar Max USB and it's installed and I can view the analog channels from my cable provider on VMC.  I've been trying for the last 2 hours to get the QAM functionality working in my VMC but no luck. 

I can view my QAM HDTV channels using the Aver Media Center.   I've downloaded the ClearQAM Utility from 11/26/2008 per Felix's instructions above.  I've followed the directions in the document.  I've exported all the found channels/services from ClearQAM utility.  Yet when I open VMC and go to the Add Missing Channels area, all I see "You have not added any missing channels".   None of the channels listed by the utility are to be found in VMC.

It seems like my export is not working.  But the utility does save the atscprefs.xml file to the c:\program data\microsoft\ehome\epg\prefs directory.

What am I doing wrong?  How I can get this working?

There's a mistake in the installation manual:
ftp://ftp.aver.com/Max/QAMTool_Release_Nov_26/ClearQAM%20Utility%20Manual%20v1.5.pdf

On page 8, step 8, the screen shot shows Cable selected.  But this is wrong.  Antenna should be selected.  The idea is to fool VMC into thinking the Volar is a ATSC source.  As Felix replied in an email: "I think you missed one step, you need to configure ATSC first. Run TV Setup Wizard again with Antenna connected, choose manual, don’t change analog cable, setup Digital part first as Antenna ATSC so you will get a digital channel listing. Then check if you can see them, then run QAM tool and transfer guide. Then in guide remove DTV channels and ATSC channels too."

Using Antenna didn't work. I used Cable to get it to work.

I have been able to get all of the free QAM channels in WMC.  However, a few (especially, ABC, in Kansas City) do not show up in Aver MediaCenter. Anyone know how to fix this?  The QAM tools shows these channels as unlocked.

I bought the Volar Max, but am having issues with the volume in digital cable (QAM) using the AverMediacenter. The volume is less than 1/4th the volume of analog tv. In fact, its so low that even when I crank it up to the max its still not loud enough. I tried in on another PC with the same result. I checked the mixer settings, and cranked up the volume in AVerMediaCenter.

I'm running with the latest download, AVer MediaCenter 1.7.2 and driver 1.0.0.88_Encoder3.0.1.2_AVIN1.1.0.10_1.0.0.7 onVista 32-bit.

Anyone else experience this? If I can't get it fixed, it will have to go back.