Herman,

In Vista, when I start my system, I always get a message from windows defender saying that startup program have been blocked, and I am required to manually select "allow" in order to open MCE standby.  Is there a solution to this?

This would not be an issue, except I would like to schedule periodic reboots.  After a reboot, without MST the system would not re-enter standby.

---

Intel DG965WH, 2GB Corsair Value Select, Core2Duo E6300, Seasonic S12-430W, ASUS 8600GT, Seagate HDs, Vistaview Saber2020, Vbox Cat's Eye 164e, Winegard SS-1000 Antenna w/ CM3042 amplifier

This has worked for me all the time:

- Right click MST executable
- Select run as administrator
- Configure and install

The copy in the Program Files directory does not get admin rights this way. MST does not need admin rights for its common tasks, only for configuration.

So if you want to change the configuration, start another copy of MST with admin rights.

Make sure you remove the currently installed version. When installed with “Run this program as an administrator” checked in the compatibility tab it will ask for confirmation at reboot.

---

Slick Solutions - home of the MCE Standby Tool (MST) and LEDSdriver

Hi All

I've being using MST Ver 9.54 on my MCE 2005 for almost 3 months and not an problem, until I installed Anydvd which causes MCE interface not to open correctly ,I have tried delay time standby time but still no go ,if I tick not not to start ehome with MST and open manually I don't have a problem, I just  don't understand what's the different from MST opening ehome to manually pushing a button to opening.

I also tried the lastest verion of MST, and what happens  I get a black screen when I use anydvd and the only way to fix it is press the reset button

I hope someone can help me

thanks

I would like to know if its posible to change the power color led (like when it sleeps) but in away mode in vista beacuse my power led stays blue (instead of orange for off)

I am using this wonder ful MCE standby tool with Vista Media Center. It works well except using with Windows Home Server.
I searched lots of forums and couldn't find the answer and I also posted the question in several forums and haven't got the answer yet. So I would like to
see if you are aware of this unique issue.

The issue is that when I use WHS, I set it backup my VMS at 4am everyday. It will wake the machine up but 15 minutes later WHS reports backup fails because
it can not connect to the VMC machine. It seems to me that the machine went back to sleep mode before WHS complete the backup.

The setup of MCE standby tool is below.

Sleep state: S3
MST is installed
eHome: Do not sto or start eHome
Idle: 'Suspend when a recording or guide update is finished' and  'Suspend when Media Center is running and idle' are checked.
Idle timeout: 60 minutes
User: Suspend when Media Center is running and no user input - 2.5 hours.

Any suggestions are appreciated.

Hi hveijk,

I've recently started to experience problems with my Dell Dimension 3100 PC running XP MCE. Without your application installed when I hit standby by PC confirms that it it entering standby mode, but as soon as it goes to sleep it immediatly wakes up.

If I install your application then standby works as it should, however upon resuming I get the error message stating that my video card is not compatable with MCE, and until I reboot I cant watch any videos. I've tried different video drivers, but thats make no difference.

If I uninstall your app then standy doesnt work very well, but I dont get the video card incompatabilty error message.

There is obviously somthing wrong with my XP settings/drivers as using the same PC running Vista MC the standby works fine with the basic Vista defaults.

Any ideas why you app is upsetting my onboard Intel video card?

@dcdyd

The only solution I can think of is scheduling a manual recording at that time, this will force MST to keep the system awake. I will see if I can make a proper solution in a future version.

@smithgt

I recently released a test build that uses a different method of closing eHome. You can find it in this thread: http://www.degroeneknop.nl/forum/index.php/topic,4182.0.html

It that does not work you can try to increase the delay before starting eHome.

Herman

---

Slick Solutions - home of the MCE Standby Tool (MST) and LEDSdriver

hveijk:

@dcdyd

The only solution I can think of is scheduling a manual recording at that time, this will force MST to keep the system awake. I will see if I can make a proper solution in a future version.

@smithgt

I recently released a test build that uses a different method of closing eHome. You can find it in this thread: http://www.degroeneknop.nl/forum/index.php/topic,4182.0.html

It that does not work you can try to increase the delay before starting eHome.

Herman

 

Thanks, Herman. I will try that new beta version.

Quick question:  Is the MCE Standby Tool designed to overrule the OS power settings completely?  Meaning, if I make a change to my power options, should it still follow the MCE Standby Tool rules that I have configured?

I've noticed a recent irregularity with my VMCE system (which uses this great tool), and I'm trying to troubleshoot whether it has something to do with a recent change I made to my power options.

Thanks,
Aaron

Hi, I've downloaded and installed the MST tool and it's very good, does as it says on the tin.

I'm getting some problems, however, when the computer resumes from S3 standby. My video card and remote control no longer work and when MCE starts it says that there is no compatible video device. A reboot fixes this and everything is back to normal.

I have read about the devcon tool, is this still the best way to fix this problem? I.e. just refresh the drivers on resume? I only ask as it seems like a bit of a hack and I was wondering if there is a better way than this?

Thanks,
Andy

Hi iám running MST 9.75 beta but have some problem, after wake up some of the buttons on the remote don’t work (back, forward, reverse) i found out that when i click the mce logo in the tray it is not responding and the system will not go in standby these two things always together any suggestions ?

hi


i have the latest mce standby tool v 0.9.75.

ive just noticed when watching live tv, mst thinks media center is running idle and therefore starts counting. eventually the pc goes into standby.

it does not do this when watching a dvd, recorded programme or listenin to music. only live tv.

the idle settings are:

'Suspend when a recording or guide update is finished'
'Suspend when Media Center is running idle'
5 Mins

the user tab is set to:

'Suspend when Media Center is running and no user input'
2.5 hours


any help is appreciated!!

cheers



edit: just noticed this is in the mce 2005 section, i am running Vista. is it worth reposting?

That trick made it working for me, thanks very much.

 

hveijk:

This has worked for me all the time:

- Right click MST executable
- Select run as administrator
- Configure and install

The copy in the Program Files directory does not get admin rights this way. MST does not need admin rights for its common tasks, only for configuration.

So if you want to change the configuration, start another copy of MST with admin rights.

Make sure you remove the currently installed version. When installed with “Run this program as an administrator” checked in the compatibility tab it will ask for confirmation at reboot.

---

My Home Cinema

My MCE 2005 machine sometimes seems to hang on the "Preparing to Stand by..." screen.  Any ideas what might cause this?

I've just turned logging on, so hopefully I'll see something in the log the next time I have a problem...

Great tool, BTW!!!

Hi,

Could you explain what the s3+4 state is?

Thanks,
Rik