Home
Blogs
Forums
Files


Welcome to The Green Button          Sign in | Join | Help

ASUS SPDIF module works with which motherboards?

Last post 06-28-2008, 3:00 PM by k44. 0 replies.
Sort Posts: Previous Next
  •  06-28-2008, 3:00 PM 270696

    ASUS SPDIF module works with which motherboards?

    I spent a lot of time surfing the net looking for help on this and didn't find much and never found any definitive "it works" so I thought I'd start a thread for those the might want to do the same thing.

    First a little background.  I built my first HTPC over the past few weeks.  I didn't realize until after building it that the High Def audio on board (Intel DG35EC motherboard) was just not cutting it when I hooked it up to my Sony STR-DA2ES.  The STR-DA2ES has separate analog and digital processing paths...I eventually realized that I needed a digital sound connection between the HTPC and the Sony.

    But my Intel DG35EC motherboard didn't have SPDIF out on the rear panel.  Instead, it only had a SPDIF header, which was supposedly provided for connecting to certain video cards which offered HDMI output but didn't have access to digital sound on the motherboard.

    I imagined that I could use the SPDIF header for a rear panel connection, using some sort of adapter, but I couldn't find anywhere on the web where somebody had done this, and had confirmed that it worked.  A few ASUS mboard owners reportedly were using the ASUS SPDIF module, but nobody else had reported in.

    So I'm here to tell you that the ASUS SPDIF module  (with the 3-wire connector into the 4-position plug) can be used with the Intel DG35EC, and probably any other motherboard with a SPDIF header that provides Vcc, SPDIF, and ground.  All that's required is some careful X-acto work on the connector to make it fit the 3-pin header on the Intel motherboard.  Check your mboard's product guide for which pin is where, Vcc, SPDIF signal, and ground.  Then do the simple cutting and sanding/shaving to get the 3 wires to their correct pins on the motherboard, and presto, you have rear-panel SPDIF both coaxial and optical outputs.

    There is a noticeable improvement in the sound this way, versus using 3 3.5mm plugs routing the six analog signals available on the motherboard back panel.  Well worth the $20 for the ASUS adapter.

    Anybody else who has tried this with other motherboards is invited to check in here with their results.


    Custom HTPC
    Vista Home Premium
View as RSS news feed in XML
About TGB | Advertise | Link To Us | Donate | Terms Of Use | Privacy Policy
© 2003-2007 The Green Button, Inc. - All Rights Reserved